SKÅDIS Pegboard Side Extension – 90 Degree Perpendicular Fin for IKEA SKÅDIS – Small, Medium or Large
Black / Small
$9.99
Skip to product information
Absolutely. I'd change not only the wording, but also the **organization and flow** so it reads like your own original Lebel Made listing rather than a sentence-by-sentence rewrite.
## 📌 IKEA SKÅDIS FIN - 90° PEGBOARD EXTENSION
Running short on SKÅDIS space? Add another usable section without installing an entire second pegboard.
The **SKÅDIS Fin** attaches directly to your existing IKEA SKÅDIS and extends outward at a **90-degree angle**, creating an extra vertical surface for organizing your setup.
The mounting clips are built right into the Fin, so installation is simple - just hook it into the slots of your existing SKÅDIS. **No screws, separate brackets, or extra mounting hardware needed.**
Use the added space for hooks, bins, tool holders, craft supplies, sewing accessories, desk organization, and many other SKÅDIS-compatible accessories.
---
🔧 MORE STORAGE WITHOUT ANOTHER BOARD
Instead of using valuable wall space for another full-size pegboard, the Fin lets you expand **outward**.
It creates a convenient side panel that gives you more places to hang and organize items while using only a small section of your main SKÅDIS board.
✨ **Features:**
✔ Attaches directly to genuine IKEA SKÅDIS pegboards
✔ Creates a 90° side extension
✔ Integrated mounting clips - no separate hardware
✔ Slots are accessible from either side of the Fin
✔ Multiple Fins can be stacked vertically
✔ Works with most of my SKÅDIS accessories
✔ Multiple sizes available / coming soon
✔ Available in **30+ colors** 🎨
---
📏 SELECT YOUR SIZE
SMALL - 5 SLOTS
Perfect when you just need a little more room. The Small Fin provides an additional area for a few hooks, holders, tools, or accessories without using much space on your main board.
**MEDIUM - Coming Soon**
**LARGE - Coming Soon**
---
📐 HOW MUCH SPACE DOES IT USE?
The **Small Fin attaches across a 2 × 3 section of SKÅDIS holes** on your existing board:
**2 holes wide × 3 holes tall**
Once attached, the Fin extends straight outward at approximately **90°**, giving you a new pegboard surface perpendicular to your original board.
Check the listing photos to get a better idea of the mounting position and how much room it will add to your setup.
**Medium - Coming Soon**
**Large - Coming Soon**
---
📦 YOU WILL RECEIVE
✔ **1 SKÅDIS Fin** in the size and color you select
The IKEA SKÅDIS pegboard, hooks, bins, tools, decorations, and other accessories pictured are **not included**.
---
⚠️ PLEASE READ BEFORE ORDERING
This accessory is designed specifically for the **IKEA SKÅDIS pegboard system**. Compatibility with generic pegboards or other brands is not guaranteed.
Each Fin is **3D printed**, so you may see slight layer lines, texture, or small cosmetic variations. These are normal characteristics of the 3D-printing process and do not affect normal use.
**IKEA and SKÅDIS are trademarks of their respective owner. This product is independently designed and produced and is not manufactured, sponsored, or endorsed by IKEA.**
SKÅDIS Pegboard Side Extension – 90 Degree Perpendicular Fin for IKEA SKÅDIS – Small, Medium or Large
$9.99
## 📌 IKEA SKÅDIS FIN - 90° PEGBOARD EXTENSION
Running short on SKÅDIS space? Add another usable section without installing an entire second pegboard.
The **SKÅDIS Fin** attaches directly to your existing IKEA SKÅDIS and extends outward at a **90-degree angle**, creating an extra vertical surface for organizing your setup.
The mounting clips are built right into the Fin, so installation is simple - just hook it into the slots of your existing SKÅDIS. **No screws, separate brackets, or extra mounting hardware needed.**
Use the added space for hooks, bins, tool holders, craft supplies, sewing accessories, desk organization, and many other SKÅDIS-compatible accessories.
---
🔧 MORE STORAGE WITHOUT ANOTHER BOARD
Instead of using valuable wall space for another full-size pegboard, the Fin lets you expand **outward**.
It creates a convenient side panel that gives you more places to hang and organize items while using only a small section of your main SKÅDIS board.
✨ **Features:**
✔ Attaches directly to genuine IKEA SKÅDIS pegboards
✔ Creates a 90° side extension
✔ Integrated mounting clips - no separate hardware
✔ Slots are accessible from either side of the Fin
✔ Multiple Fins can be stacked vertically
✔ Works with most of my SKÅDIS accessories
✔ Multiple sizes available / coming soon
✔ Available in **30+ colors** 🎨
---
📏 SELECT YOUR SIZE
SMALL - 5 SLOTS
Perfect when you just need a little more room. The Small Fin provides an additional area for a few hooks, holders, tools, or accessories without using much space on your main board.
**MEDIUM - Coming Soon**
**LARGE - Coming Soon**
---
📐 HOW MUCH SPACE DOES IT USE?
The **Small Fin attaches across a 2 × 3 section of SKÅDIS holes** on your existing board:
**2 holes wide × 3 holes tall**
Once attached, the Fin extends straight outward at approximately **90°**, giving you a new pegboard surface perpendicular to your original board.
Check the listing photos to get a better idea of the mounting position and how much room it will add to your setup.
**Medium - Coming Soon**
**Large - Coming Soon**
---
📦 YOU WILL RECEIVE
✔ **1 SKÅDIS Fin** in the size and color you select
The IKEA SKÅDIS pegboard, hooks, bins, tools, decorations, and other accessories pictured are **not included**.
---
⚠️ PLEASE READ BEFORE ORDERING
This accessory is designed specifically for the **IKEA SKÅDIS pegboard system**. Compatibility with generic pegboards or other brands is not guaranteed.
Each Fin is **3D printed**, so you may see slight layer lines, texture, or small cosmetic variations. These are normal characteristics of the 3D-printing process and do not affect normal use.
**IKEA and SKÅDIS are trademarks of their respective owner. This product is independently designed and produced and is not manufactured, sponsored, or endorsed by IKEA.**